Product ID:SILICONE LUBRICATING GREASE, G321
MSDS Date:02/12/1993
FSC:9150
NIIN:00N035644
MSDS Number: BZLWG

GE SILICONES

260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: GESIL

GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT

WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

DIMETHYL DIPHENYL POLYSILOXANE; (METHYLPHENYLSILOXANE

CAS: 68083-14-7

Fraction By Weight: 60-80%

OSHA PEL N/K

ACGIH TLV: N/K

STEARIC ACID, LITHIUM SALT; (LITHIUM STEARATE)

CAS: 4485-12-5

RTECS: WI4370000

Fraction By Weight: 10-30%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN: MAY CAUSE MILD SKIN
IRRITATION. INHALATION: A DUST HAZARD MAY BE CREATED IF, UNDER
CONDITIONS OF USE, SOLID PARTICLES ARE SEPARATED FROM THE POLYMERIC
MATRIX. EYES: MAY CAUSE IRRITATION. TARGET ORGANS: RESPIRATORY
AILMENTS. THIS PRODUCT CONTAINS METHYLPOLYSILOXANES WHICH CAN
GENERATE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: FORMALDEHYDE AT APPROXIMATELY 300F
(150C) AND ABOVE, IN ATMOSPHERES WHICH CONTAIN OXYGEN. FORMALDEHYDE
IS A SKIN AND RESPIRATORY SENSITIZER, EYE AND THROAT IRRITANT,
ACUTE TOXICANT, AND POTE NTIAL CANCER HAZARD. AN MSDS FOR
FORMALDEHYDE IS AVAILABLE FROM MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:INGESTION: RINSE MOUTH WITH WATER SEVERAL TIMES. SKIN: WASH
WITH SOAP AND WATER. INHALATION: MOVE PERSON TO FRESH AIR. EYES:
IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND
GET MEDI CAL ATTENTION IF IRRITATION PERSISTS.

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT AND WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER
PROTECTIVE EQUIPMENT AS SPECIFIE D IN THE PROTECTIVE EQUIPMENT
SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID CONTACT WITH EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE KNOWN. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE KNOWN.
Protective Gloves:CLOTH GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Spec Gravity:0.99 (H*2O=1)
Solubility in Water:<1
Appearance and Odor:WHITE SOLID, ODORLESS
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE, FORMALDEHYDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.